FAQs
More FAQs- Are there instructions to follow after my carpets are cleaned?
- How often do we need to disinfect?
- How often do I clean my floors?
Immediately after cleaning, it’s best to allow carpets to dry for 6-8 hours before walking on them. Walking on them may flatten the fibers. Use air movers if needed to help air circulation as this will speed up the drying time. If a carpet protector such as ScotchgardTM was applied, foot traffic should be minimized for up to 24 hours to let the product cure. Don’t move any furniture back in place until carpet is completely dry or the Scotchgard carpet protector has cured.
A key consideration in determining how often you should be disinfecting is based on the traffic level in your facility. As disinfection is for infection prevention, the goal is to help to mitigate surface-to-person transmission of pathogens. If your 10,000 SF office will be occupied by 5 staff and no visitors, you can likely disinfect less frequently than that same office which might house 60 staff and consistent visitors. Additional considerations include how often multiple people may be touching the same surface as well as whether an antimicrobial surface protectant has been applied. At minimum, however, we would recommend daily disinfection of high touch surfaces. If the traffic in your facility is high, we would recommend increasing this frequency to multiple times per day. For example, common elevator lobbies in an office tower should be disinfected multiple times per day, particularly at the entrance level.
Urethane requires only damp mopping on a daily basis or the use of an auto scrubber with a white pad, red pad or a soft brush. Never dry buff or dry scrub your floor; a loss of gloss may occur.